How To Hang Cutting Board On Wall In 5 Easy Steps- 2023

If you love to cook, you know that a good cutting board is essential for the kitchen. But what do you do with it when you’re not using it? A great way to keep your cutting board handy and make it part of your kitchen décor is to hang it on the wall. So you must know how to hang a cutting board on the wall.

One way to hang a cutting board on a wall is to use screws and wall anchors. Wall anchors are especially useful if the wall is made of plaster or another material that is difficult to screw into. However, I’ll review the steps to hanging a cutting board on the wall in this blog. With the right guidance and a few supplies, you can hang your cutting board on the wall in no time.

How To Hang Cutting Board On Wall

Hanging a cutting board on a wall is a great way to save counter space in your kitchen and add a decorative touch to your wall. Here are the steps to hang a cutting board on a wall:

Gather Supplies: 

First, gather the necessary supplies to hang a cutting board on a wall. These include:

•  the cutting board
• a wall mount
• a drill and drill bits
• a screwdriver
• and screws. 

Measure and Mark Wall: 

To hang a cutting board on the wall, start by measuring the width and height of the cutting board. Once the measurements are known, mark the wall with a pencil to indicate where the cutting board will be hung. It is essential to take the time to measure and mark the wall correctly to ensure the cutting board is hung properly.

Attach Wall Mount: 

Once your wall mount and cutting board are ready, it’s time to begin attaching them to the wall. Start by drilling holes in the wall according to the instructions provided with the wall mount. Then use a screwdriver to secure the wall mount with the screws provided. Ensure the wall mount is level and secure before hanging the cutting board. Once the wall mount is attached, the cutting board is ready to be hung.

Hang Cutting Board: 

To hang your cutting board securely, slide it onto the wall mount, ensuring it is secure and level. Depending on your chosen mounting hardware, you may need to use a locking mechanism to ensure the cutting board is securely attached to the wall. Once the cutting board is in place, add a few screws to secure it in place. You can also use decorative knobs or hooks to add a decorative touch to your cutting board. With the proper hardware and a few minutes of your time, you can easily hang your cutting board on the wall for easy access and a stylish look.

Enjoy: 

Now that you have completed mounting your cutting board to the wall, it’s time to step back and admire your work. You should be proud of yourself for taking on an ambitious project and completing it successfully. With your cutting board securely mounted, you can now enjoy having a stylish and functional display. Show off your handy work to friends and family, and be sure to store your cutting board properly when not in use.

That’s it about how to hang a cutting board on the wall. You now have a cutting board hanging on your wall and ready for use.

How to Hang a Decorative Cutting Board?

Hanging a decorative cutting board can be a great way to showcase its design and add visual interest to your kitchen or dining area. Here’s a step-by-step guide on how to hang a decorative cutting board:

1. Choose a suitable location: Select a wall or other vertical surface where you want to hang the decorative cutting board. Consider a spot that complements the overall aesthetic of the space and allows the board to be easily seen and appreciated.
2. Determine the hanging method: There are various methods you can use to hang a decorative cutting board, depending on its design and your preference. Here are a few options:
   • Plate Hangers: Look for plate hangers specifically designed for decorative plates or boards. These usually consist of a wire that wraps around the rim of the board and an adjustable hook for hanging. Follow the manufacturer’s instructions for attaching the plate hanger to the back of your cutting board.
   • Adhesive Hooks: If your decorative cutting board has a smooth back surface, you can use adhesive hooks. Choose hooks that are strong enough to support the weight of the board. Clean the back of the board and the wall surface before attaching the hooks. Press the hooks firmly against the board and hold them in place for the recommended time to ensure a strong bond.
   • Wall-mounted Brackets: Depending on the design and structure of your cutting board, you may be able to attach wall-mounted brackets or hooks to it. These brackets can then be screwed into the wall. Make sure to select brackets that are appropriate for the size and weight of your board.
3. Measure and mark: Measure the distance between the hanging points or hooks on the back of the cutting board. Use a measuring tape or ruler to mark the corresponding spots on the wall where you want to hang the board. Use a level to ensure that your markings are straight and aligned.
4. Install the hanging mechanism: Depending on the chosen method, follow the instructions provided with the plate hangers, adhesive hooks, or wall-mounted brackets to install them securely on the wall.
5. Hang the decorative cutting board: Align the hanging points on the back of the cutting board with the hooks or brackets on the wall. Carefully place the board onto the hooks or brackets, ensuring a secure fit. Double-check that the board is level and properly balanced.
6. Test stability: Gently shake or push the decorative cutting board to ensure it is securely hung and won’t easily fall off. Make any necessary adjustments to the hanging mechanism to improve stability.

Remember to consider the weight and design of your decorative cutting board when selecting the hanging method and ensure that it is securely fastened to prevent accidents or damage.

What Are Some Safety Tips For Hanging A Cutting Board?

Hanging a cutting board can be a convenient and space-saving way to store it in your kitchen. Here are some safety tips to consider when hanging a cutting board:

1. Stable and secure mounting: Ensure that the hooks, brackets, or any other hanging mechanism you use are securely mounted to the wall or cabinet. This will prevent the cutting board from falling and causing injury.
2. Weight capacity: Check the weight capacity of the hooks or brackets you are using to ensure they can support the weight of the cutting board. This is especially important if you have a heavy or large cutting board.
3. Proper location: Choose a location for hanging the cutting board that is easily accessible but out of the way of heavy traffic or potential hazards. Avoid hanging it above stoves, sinks, or areas where it could accidentally fall into hot liquids or sharp objects.
4. Adequate clearance: Make sure there is enough clearance below the cutting board when it is hung to prevent it from interfering with other objects or countertops. This will help avoid accidental collisions and potential damage.
5. Secure placement: When hanging the cutting board, make sure it is placed securely on the hooks or brackets. Double-check that it is properly balanced and doesn’t wobble or slide off easily.
6. Consider the material: If you have a wooden cutting board, avoid hanging it in a location with excessive humidity or moisture, as this can lead to warping or splitting. Opt for a dry and well-ventilated area instead.
7. Maintenance: Regularly inspect the hooks, brackets, or other hanging mechanisms to ensure they are in good condition and securely fastened. Additionally, clean and sanitize the cutting board regularly, as it will be exposed and may collect dust or other contaminants while hanging.

Remember, these tips are general guidelines, and you should always use your judgment and consider the specific circumstances of your kitchen when hanging a cutting board.

How to Hang a Charcuterie Board?

Hanging a charcuterie board can add an aesthetic touch to your kitchen or dining area. Here’s a step-by-step guide on how to hang a charcuterie board:

1. Choose the right location: Select a suitable location on a wall or other vertical surface where you want to hang the charcuterie board. Consider an area that is easily accessible and visually appealing.
2. Select the hanging method: There are different ways to hang a charcuterie board, depending on its design and your personal preference. Here are a few common methods:
   • Plate Hangers: Look for plate hangers specifically designed for hanging decorative plates or boards. These usually consist of a wire that wraps around the rim of the board and an adjustable hook for hanging. Follow the manufacturer’s instructions for attaching the plate hanger to the back of your charcuterie board.
   • Adhesive Hooks: If your charcuterie board has a smooth back surface, you can use adhesive hooks. Choose hooks that are strong enough to support the weight of the board. Clean the back of the board and the wall surface before attaching the hooks. Press the hooks firmly against the board and hold them in place for the recommended time to ensure a strong bond.
   • Wall-mounted Brackets: Another option is to use wall-mounted brackets or hooks specifically designed for charcuterie boards. These brackets typically have a decorative design and can be screwed into the wall. Make sure to select brackets that are appropriate for the size and weight of your board.
3. Measure and mark: Once you have decided on the hanging method, measure the distance between the hanging points or hooks on the back of the board. Use a measuring tape or ruler to mark the corresponding spots on the wall where you want to hang the board. Use a level to ensure that your markings are straight and aligned.
4. Install the hanging mechanism: Depending on the chosen method, follow the instructions provided with the plate hangers, adhesive hooks, or wall-mounted brackets to install them securely on the wall.
5. Hang the charcuterie board: Carefully align the hanging points on the back of the charcuterie board with the hooks or brackets on the wall. Gently place the board onto the hooks or brackets, ensuring a secure fit. Double-check that the board is level and properly balanced.
6. Test stability: Give the charcuterie board a gentle shake or push to ensure it is securely hung and won’t easily fall off. If necessary, make any adjustments to the hanging mechanism to improve stability.

Remember to consider the weight and size of your charcuterie board when selecting the hanging method and ensure that it is securely fastened to avoid accidents or damage.

People Also Ask

Can I hang on the wall any kind of cutting board?

It depends on the weight of your cutting board and the type of hanger you choose. Most cutting board hangers are made for specific sizes and weights of wooden or plastic cutting boards. Make sure to look at the hanger’s specs before buying it.

How do I know if the hanger is attached to the wall securely?

Use a level to ensure the hanger is straight, then give it a gentle pull to attach it to the wall securely. If it moves around or feels loose, try tightening the screws or putting it somewhere else.

Can I use the same hanger to hold more than one cutting board?

It depends on how heavy the cutting boards are and how much weight the hanger can hold. Some hangers can hold more than one cutting board but don’t exceed the weight limit, or you could damage the hanger or the wall.

Can I hang my cutting board on the wall with sticky strips or hooks?

Even though hooks or adhesive strips might work for lighter cutting boards, it’s usually not a good idea because they might not be able to hold the board’s weight over time. It’s best to use a hanger for cutting boards made for this purpose.

How do I clean my cutting board if it’s hanging on the wall?

Just remove the cutting board from the hanger and clean it normally. If you need to, wipe down the hanger and the wall.

Final Thought

Finally, Now that you know how to hang cutting board on wall, you can free up space on your kitchen counter and make your wall look nicer. Putting a cutting board on the wall is easy. You must find the right spot, measure the board, choose the right hanger, and securely put it on the wall.

Following the steps in this guide won’t take long to hang your cutting board on the wall. Remember to test the board’s stability to ensure it’s securely fastened. With these easy steps, you can have a cutting board that you can hang on the wall that is useful and nice to look at.